For more information about this solution refer to the Cisco Endpoint Security Analytics for Splunk (CESA) home page.
Cisco Endpoint Security Analytics for Splunk (CESA) consists of 3 components:
Below is a high level overview of a deployment in its simplest form.
This would be an all-in-one configuration running on 64-bit Linux.
This configuration is how most demonstrations will be setup and is also useful in a small production deployment.
Below is a more comprehensive set of options that are available for deployment.
Typically a production setup will be distributed and have several Splunk Enterprise nodes.
Please restart the Spunk Server after installation of both components is completed.
You can confirm that both components are properly installed by viewing them in "Manage Apps"
After completing this step, refer to the NVM collector installation section below. The collector must be running before data will be available to the Splunk components.
The default configuration receives three data feeds for Splunk, Per Flow Data, Endpoint System Data and Endpoint Interface Data, on UDP ports 20519, 20520 and 20521 respectively. This can be changed in the Application Input settings in Splunk if for some reason you needed to change the collector configuration as described below.
The Add-On maps these to Splunk sourcetypes cisco:nvm:flowdata, cisco:nvm:sysdata and cisco:nvm:ifdata.
NOTE: Because sourcetypes have changed older data generated from version 1.x will not map to the UI dashboards.
The NVM collector runs on 64-bit Linux. CentOS, Ubuntu and Docker configuration scripts are included. The CentOS install scripts and configuration files can also be used in Fedora and Redhat distributions.
In a typical distrubuted Splunk Enterprise deployment, the collector should be run on either a standalone 64-bit Linux system or a Splunk Forwarder node running on 64-bit Linux.
NOTE: The solution can also be run on a single 64-bit Linux system that includes the NVM collector and Splunk Enterprise components for use in a small deployment or for demonstration purposes.
In order to install the collector you will need to copy the application in the acnvmcollector.zip file, located in the [YOUR_SPLUNK_SERVER]/$APP_DIR$/appserver/addon/ directory to the system you plan to install it on.
Extract the files on the system where you plan to install the collector on and execute the install.sh script with super user privileges. It is recommended to read the $PLATFORM$_README file in the .zip bundle before executing the install.sh script. The $PLATFORM$_README file provides information on the relevant configuration settings that need to be verified and modified (if necessary) before the install.sh script is executed. At a minimum, you will need to configure the address of the Splunk instance you will be forwarding data to. Failing to properly configure the system can cause the collector to operate incorrectly.
NOTE: Ensure that network and host firewalls are properly configured to allow the UDP traffic for the source and destination addresses and ports
A single NVM collector instance can handle a minimum of 5000 flows per second on a properly sized system.
The collector needs to be configured and running before the Splunk App can be used.
By default, the collector receives flows from AnyConnect NVM endpoints on UDP port 2055.
Additionally, the collector produces three data feeds for Splunk, Per Flow Data, Endpoint System Data and Endpoint Interface Data, on UDP ports 20519, 20520 and 20521 respectively.
The receive and data feed ports can be changed by altering the acnvm.conf file and restarting the collector instance. Make sure that any host/network firewalls between endpoints and the collector or between the collector and Splunk system(s) are open for the configured UDP ports and addresses. Also ensure that your AnyConnect NVM configuration matches your collector configuration. Refer to the AnyConnect Administration Guide for more information.
Once all components are installed and running, refer to the Help files section from within the Splunk application for detailed information about the pre-configured reports, data model and information elements that are created by the solution.
You may want to restart one of your AnyConnect endpoints and validate that data is being sent to the solution.
Some additional information is available at this Cisco Community Site that you might find useful.
Recommended hardware requirements for a standalone NVM Collector instance running on 64-bit Linux:
NVM Collector multiprocess mode enabled (on by default)
Upto 1000 endpoints / server instance:
1000-5000 endpoints / server instance:
7500-10,000 endpoints / server instance:
Splunk Developers who are interested in learning more about the AnyConnect NVM protocol and overall solution can go to the Cisco DevNet site for more information.
This app is written and maintained by Cisco (nvzFlow at cisco dot com). Be sure to read the above sections for initial assistance with setup and configuration. See Supplemental End User License as well as the Cisco Endpoint Security Analytics for Splunk home page for more information.
Updated cloud compliance tags in SimpleXML
Fixed bug in Destination Addresses
Third party links now open in new tabs
Added new screens to navigation
*Fixed a query bug with unresolved DNS entries that were supposed to show the domain address in place of "Unknown"
Updated dashboards to include process path and parameter visualizations
Changed the default DNS values from "Unknown" to the Ip Address of the destination host
*Removed redundant documentation that can be found on the Cisco AnyConnect reference site
Fixed bug in Users Disabling Endpoints Analytic
Fixed Process Listing drill down
Synced versioning with the TA app
Removed embedded binary for the NVM collector which only resides in the TA
Modified the app setup page to include config options for the crons in savedsearches.conf
Defaulted crons to 5 min refresh rates
Changed Process Listing metric to show log vs linear scale, making it easier to identify less common anomalies
Added monitoring frequency filter to the Security Evasion metric
If you are having Docker related issues - email nvzFlow@cisco.com for instructions on how to address it. An update will be posted soon.
2.x supports a new look and feel in addition to several new reports with a focus on Split Tunneling (remote workers) and Split Networking (office workers using insecure wifi and secure wifi at the same time) monitoring. The new dashboards are organized into several use cases identified below. It's important to note that many of the dashboards help identify potential threats and aid in the investigative process, however that does not necessarily indicate an attack or compromise occurred.
As a Splunkbase app developer, you will have access to all Splunk development resources and receive a 10GB license to build an app that will help solve use cases for customers all over the world. Splunkbase has 1000+ apps from Splunk, our partners and our community. Find an app for most any data source and user need, or simply create your own with help from our developer portal.